backWires:
- BES (Bessemer steel wire)
- PHB (Phosphor-bronze-wire (CuSn])
- MES (Brass-wire [CuZn])
- NSI (Nickel-silver-wire [CuNi])
- STD [Steel wire, natural hard]
- SUP (steel wire, tempered, straight)
- INOX (V2A stainless steel wire, acid resistant, crimped or straight)
- INOX (V4A stainless steel wire, acid resistant, crimped or straight)
- RFH (Special wire, corrosion-proof)
- TRD (Special wire, highly heat resistant)
- SSD (Steel wire)
- ASD (steel wire, tempered, extra hard and particularly tough)
- LIT (Brass-coated steel wire in cord construction)
- LTE (Brass-coated steel wire, single wire)
- AZD (Steel wire, tempered, hard and tough)
- FLA (Flat wire, tempered)
back backSynthetic bristles - PP (Polypropylen):
Polypropylene, acid resistant, straight or crimped, colours on request, dia. 0.10 mm to 1.00 mm.
back backSynthetic bristles - PAP (Special filament polypropylene based on PP):
Special filament polypropylene based which gives longer live through
acid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back backSynthetic bristles - PBT (Polyester):
Polyester, straight or crimped, colours on request, dia. 0.20 mm to 3.00 mm.
back backSynthetic bristles - PA 6.6 (Polyamide):
All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6.6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back backSynthetic bristles - PA 6.12 (Polyamide):
Polyamide, straight or crimped, colours on request. Diameter 0,08 - 3,00 mm. All polyamid qualities have strong recovery properties. In case of wet use PA 6.12
ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back backSynthetic bristles - KBL (Special bristle based on, very good alkaline and temperature resistance):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.
back backSynthetic bristles - HCB (Extremely heat and chemical resistant):
Extremely heat resistant (up to max. 240 °C) and chemical resistant special straight filament, colours on request, dia. 0.20 mm to 0.60 mm.back backSynthetic bristles - PE (Polyethylene):
Polyethylene, straight or in x-cross-section, either flagged or normal, colours on request, dia. 0.80 mm to 1.00 mm.
back backSynthetic bristles - CON (Electrically conductive, special filament):
electrically conductive, special filament (up to 5 x10 kOhm/cm2) based on polyamide, straight, black,temperature resistant up to 100 °C, dia. 0.13 mm and 0,25 mm. For large quantities the following bristle-dia. are available to special order: 0.21 mm, 0.41 mm, 0.52 mm and 0.64 mm.
back backANDERLON abrasive filaments - ANS PA6 (Polyamide; embedded abrasive grit):
Polyamide; embedded abrasive gritback backANDERLON abrasive filaments - ANS PA6.12 (Polyamide; embedded abrasive grit):
PA 6.12 besitzt die beste Abriebfestigkeit und behält im Naßbetrieb durch geringe Wasseraufnahme seine gute Steifigkeitback backANDERLON abrasive filaments - ANS KBL (Anderlon, lye-steadily):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back backANDERLON abrasive filaments - ANS-R (Round filament with embedded silicon carbide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back backANDERLON abrasive filaments - ANS-F (Anderlon-Flat bristle):
A flat bristle (1.20 x 2.50 mm) and (1.14 x 2.28 mm) für that gives longer life and shorter processing time, is very stiff and contains a high percentage of abrasive grit.These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back backANDERLON abrasive filaments - ANA (Anderlon round filament with aluminium oxide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back backANDERLON abrasive filaments - AND (Anderlon with diamond grit):
Diamond grain is aggressive towards almost everything! Due to this diamond grain the AND filament has maximum aggression and a considerable lifetime. Therefore this ANDERLON quality is especially used for the treatment of hard alloy tools.
back backWires - BES (Bessemer steel wire):
Bessemer steel wire, crimped, dia. 0.06 mm to 0.25 mm.
back backWires - PHB (Phosphor-bronze-wire (CuSn]):
Phosphor-bronze-wire (CuSn), straight or crimped, dia. 0.05 mm to 0.50 mm.
back backWires - MES (Brass-wire [CuZn]):
Brass wire (CuZn), straight or crimped, dia. 0.06 mm to 0.56 mm.
back backWires - NSI (Nickel-silver-wire [CuNi]):
Nickel-silver-wire (CuNi), crimped, dia 0.06 mm to 0.25 mm.
back backWires - STD [Steel wire, natural hard]:
Steel wire, natural hard, crimped, dia. 0.06 mm to 0.80 mm.
back backWires - SUP (steel wire, tempered, straight):
steel wire, tempered, straight, dia. 0.30 mm to 1.20 mm.
back backWires - INOX (V2A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.30 mm to 1.00 mm.
back backWires - INOX (V4A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.30 mm to 1.00 mm.
back backWires - RFH (Special wire, corrosion-proof):
Special wire, corrosion-proof, resistant against process steam up to 650 °C, straight or crimped, dia. 0.30 mm to 0.50 mm.
back backWires - TRD (Special wire, highly heat resistant):
Special wire, highly heat resistant up to 1350 °C, crimped, dia. 0.30 mm to 0.50 mm.
back backWires - SSD (Steel wire):
Steel wire, natural hard, extra hard, crimped, dia. 0.12 mm to 0,25 mm.
back backWires - ASD (steel wire, tempered, extra hard and particularly tough):
Steel wire, tempered, extra hard and particularly tough, crimped, dia. 0.20 mm to 0.50 mm.
back backWires - LIT (Brass-coated steel wire in cord construction):
Brass-coated steel wire in cord construction, springy and tough, crimped, dia. 0.15 mm to 0.38 mm
back backWires - LTE (Brass-coated steel wire, single wire):
Brass-coated steel wire, single wire, springy, crimped, dia. 0.15 mm nto 0.38 mm
back backWires - AZD (Steel wire, tempered, hard and tough):
Steel wire, tempered, hard and tough, straight, dia. 0.25 mm to 0.80 mm.
back backWires - FLA (Flat wire, tempered):
Flat wire, tempered, straight, 1.10 mm x 0.25 mm to 3.30 mm x 0.75 mm (or on request)
back backPlant fibres - FIB (Tampico-Fibre, medium hard):
Tampico-Fibre, medium
back backPlant fibres - FIB-GU (Tampico-Fibre, medium):
Tampico-Fibre, medium to hard, grey
back backPlant fibres - SIS (Sisal twines):
Sisal twines, twine dia. Diameter from 2.8 mm to 5.0 mm
back backSynthetic bristles - PP (Polypropylen):
Polypropylene, acid resistant, straight or crimped, colours on request, dia. 0.10 mm to 1.00 mm.back backSynthetic bristles - PAP (Special filament polypropylene based on PP):
Special filament polypropylene based which gives longer live through
acid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back backSynthetic bristles - PBT (Polyester):
Polyester, straight or crimped, colours on request, dia. 0.20 mm to 3.00 mm.back backSynthetic bristles - PA 6.6 (Polyamide):
All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6.6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.back backSynthetic bristles - PA 6.12 (Polyamide):
Polyamide, straight or crimped, colours on request. Diameter 0,08 - 3,00 mm. All polyamid qualities have strong recovery properties. In case of wet use PA 6.12
ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back backSynthetic bristles - KBL (Special bristle based on, very good alkaline and temperature resistance):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back backSynthetic bristles - HCB (Extremely heat and chemical resistant):
Extremely heat resistant (up to max. 240 °C) and chemical resistant special straight filament, colours on request, dia. 0.20 mm to 0.60 mm.back backSynthetic bristles - PE (Polyethylene):
Polyethylene, straight or in x-cross-section, either flagged or normal, colours on request, dia. 0.80 mm to 1.00 mm.
back backSynthetic bristles - CON (Electrically conductive, special filament):
electrically conductive, special filament (up to 5 x10 kOhm/cm2) based on polyamide, straight, black,temperature resistant up to 100 °C, dia. 0.13 mm and 0,25 mm. For large quantities the following bristle-dia. are available to special order: 0.21 mm, 0.41 mm, 0.52 mm and 0.64 mm.
back backANDERLON abrasive filaments - ANS PA6 (Polyamide; embedded abrasive grit):
Polyamide; embedded abrasive gritback backANDERLON abrasive filaments - ANS PA6.12 (Polyamide; embedded abrasive grit):
PA 6.12 besitzt die beste Abriebfestigkeit und behält im Naßbetrieb durch geringe Wasseraufnahme seine gute Steifigkeitback backANDERLON abrasive filaments - ANS KBL (Anderlon, lye-steadily):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back backANDERLON abrasive filaments - ANS-R (Round filament with embedded silicon carbide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back backANDERLON abrasive filaments - ANS-F (Anderlon-Flat bristle):
A flat bristle (1.20 x 2.50 mm) and (1.14 x 2.28 mm) für that gives longer life and shorter processing time, is very stiff and contains a high percentage of abrasive grit.These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back backANDERLON abrasive filaments - ANA (Anderlon round filament with aluminium oxide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back backANDERLON abrasive filaments - AND (Anderlon with diamond grit):
Diamond grain is aggressive towards almost everything! Due to this diamond grain the AND filament has maximum aggression and a considerable lifetime. Therefore this ANDERLON quality is especially used for the treatment of hard alloy tools.
back backWires - BES (Bessemer steel wire):
Bessemer steel wire, crimped, dia. 0.06 mm to 0.25 mm.back backWires - PHB (Phosphor-bronze-wire (CuSn]):
Phosphor-bronze-wire (CuSn), straight or crimped, dia. 0.05 mm to 0.50 mm.back backWires - MES (Brass-wire [CuZn]):
Brass wire (CuZn), straight or crimped, dia. 0.06 mm to 0.56 mm.back backWires - NSI (Nickel-silver-wire [CuNi]):
Nickel-silver-wire (CuNi), crimped, dia 0.06 mm to 0.25 mm.back backWires - STD [Steel wire, natural hard]:
Steel wire, natural hard, crimped, dia. 0.06 mm to 0.80 mm.
back backWires - SUP (steel wire, tempered, straight):
steel wire, tempered, straight, dia. 0.30 mm to 1.20 mm.back backWires - INOX (V2A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.30 mm to 1.00 mm.back backWires - INOX (V4A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.30 mm to 1.00 mm.back backWires - RFH (Special wire, corrosion-proof):
Special wire, corrosion-proof, resistant against process steam up to 650 °C, straight or crimped, dia. 0.30 mm to 0.50 mm.back backWires - TRD (Special wire, highly heat resistant):
Special wire, highly heat resistant up to 1350 °C, crimped, dia. 0.30 mm to 0.50 mm.back backWires - SSD (Steel wire):
Steel wire, natural hard, extra hard, crimped, dia. 0.12 mm to 0,25 mm.back backWires - ASD (steel wire, tempered, extra hard and particularly tough):
Steel wire, tempered, extra hard and particularly tough, crimped, dia. 0.20 mm to 0.50 mm.back backWires - LIT (Brass-coated steel wire in cord construction):
Brass-coated steel wire in cord construction, springy and tough, crimped, dia. 0.15 mm to 0.38 mm
back backWires - LTE (Brass-coated steel wire, single wire):
Brass-coated steel wire, single wire, springy, crimped, dia. 0.15 mm nto 0.38 mm
back backWires - AZD (Steel wire, tempered, hard and tough):
Steel wire, tempered, hard and tough, straight, dia. 0.25 mm to 0.80 mm.
back backWires - FLA (Flat wire, tempered):
Flat wire, tempered, straight, 1.10 mm x 0.25 mm to 3.30 mm x 0.75 mm (or on request)back backPlant fibres - FIB (Tampico-Fibre, medium hard):
Tampico-Fibre, medium
back backPlant fibres - FIB-GU (Tampico-Fibre, medium):
Tampico-Fibre, medium to hard, grey
back backPlant fibres - SIS (Sisal twines):
Sisal twines, twine dia. Diameter from 2.8 mm to 5.0 mm
back backSolid steel shaft - WK1:
Solid steel shaft with/without key
Possible Body materials:
We manufacture the cores in steel, steel-plastic coated, non ferrous metal or stainless and acid resistant steel No. 1.4301, 1.4571 or 2.4879, adequate
for wet or dry operation or for high temperature.
Should you be in need of certified, electrodynamically balanced cores for a fixed rotation speed or other working conditions in your plant – we will do it to balancing standard G 2,5 (ISO 1940).
back backTubular core with axles - WK2:
Tubular core with stub axles for drive and bearing
Possible Body materials:
We manufacture the cores in steel, steel-plastic coated, non ferrous metal or stainless and acid resistant steel No. 1.4301, 1.4571 or 2.4879, adequate
for wet or dry operation or for high temperature.
Should you be in need of certified, electrodynamically balanced cores for a fixed rotation speed or other working conditions in your plant – we will do it to balancing standard G 2,5 (ISO 1940).
back 
